LMS-23 Bộ xử lý tín hiệu KOREA

THÔNG SỐ KỸ THUẬT SẢN PHẨM

Model LMS-23 Inputs   Connectors Female XLR (inputs), Male XLR(input through) Type Electronically balanced/RF filtered Impedance Balanced ＞20k ohm. Unbalanced ＞10k ohm Max Input Level ＞+19dBu balanced or unbalanced CMRR   Outputs   Connectors Male XLR (pin 2 hot) Type Impedance-balanaced/unbalanced, RF filtered Impedance Balanced 100 ohm, unbalanced 50 ohm Max Output Level ＞+21dBu balanced/unbalanced into 2k or greater System performance   Gain Control Range -20 dBu to + 20 dBu Frequency Response 20Hz to 20kHz, +/-0.5dB from target response Signal-to-Noise Ref: +4 dBu, 22 kHz measurement bandwidth Stereo or mono parallel Mode ＞94dB (SF Output) ＞93dB (LF Output ) ＞92dB (HF Output) Dynamic Range ＞114 dB, unweighted, any output THD + Noise ＜0.03% at +4 dBu, 1 kHz ＜0.05% at +20 dBu, 1 kHz Interchannel Crosstalk ＜-80 dB, 20 Hz to 20 kHz Compressor/Limiter   Threshold Level Range 5:'-42 dBu to '+18dBu Ratio 1:1- ∞ : 1 Processor Type Analog engine dynamic processor     Equalization Fixed 4 band (factory setting) Phase Shift 0 or 180º (SF output) 0 or 180º (LF output) Crossover Frequencies   Sub Woofer 63 to 250Hz Low/High 630 to 5KHz Filter type Linkwitz-Riley, 24 dB/octave, state-variable     Function Switches   Mute Controls Activates signal mute on LF and HF output Activates signal mute on SF output. Low Cut Filters Activates 15 Hz Butterworth, 12 dB/octave high-pass filter (SF output) Rear Panel   Mode Setect Selects stereo 2-way or parallel mono 2-way operation Ground Lift Disconnects from AC ground Indicators   Stereo Operation LED OFF Parallel Mono Operation Yellow LED Turn on Sig Green LED turn on from '- 10dBu input level. Gain Reduction Meter 4-LED bar graph (all Red) at 0, 3, 6, and 10dB     Power Supply   Operating Voltage 100 VAC 50/60 Hz; 120 VAC 60 Hz ; 230 VAC 50 Hz Power consumption 15W Main Connection IEC Receptacle Physical   Dimensions: WXHXD 483X44X176mm Shipping/CBM 0.0255 Weight 2.5 kg Shipping Weight 3.9 kg