Amply mixer 300W x 2 VM11S-DRVSTK

Mã sản phẩm: VM11S-DRV STK
Nhóm sản phẩm: Mixer liền công suất
Hãng sản xuất: STK/Korea
Trạng thái: Sẵn hàng

Giá NY: Gọi để biết giá

Mô tả
Bình luận - Đánh giá

THÔNG SỐ KỸ THUẬT SẢN PHẨM

Model	VM11S-DRV
Configuration
Power(EIA)
4 ohm load per channel	330W + 330W
8 ohm load per channel	220W + 220W
Rated Power(20-20kHz)
4 ohm load	300W + 330W
8 ohm load	200W + 200W
Distortion (THD & SMPTE IND; 20Hz to 10kHz)
Mic input to main mixes output	0.01%
Mic input to power amp output	0.05%
Inputs (all 1/4” TRS are Bal./Unbal.except*)
Mono mic/line	7 + 2 XLR Jack
Stereo line	4 1/4" TRS Phone Jack
Tape In	Stereo RCA Jack
AUX Returns	TS 1/4” Phone Jack
Outputs (all 1/4” TRS are Bal./Unbal.except*)
Speaker Outputs	TS 1/4”
Main Mix(line)Level	1 TS 1/4”, L,1TS 1/4” R
Main Mono(Subwoofer)	TS 1/4”
Aux Sends	TRS 1/4”, 1 EFX, 1 Mon
Tape L/R Stereo	Stereo RCA
Controls Channel
AUX Send Control	1 EFX, 1 Mon
Constant Pan Control	Yes
10dB Input PAD	Yes
Controls Master
Digi EFX	Dual Variable 1 REV Control(0.5~10 sec) 1 DELAY Control(50~1000 msec) 1 FEEDBACK Control(0-90%) 1 Delay and Reverb MIXING Control(0~100%)
Digi EFX Control	On/Off, LED Level Set
Digi EFX Buss Control	1 + 1 Monitor
Aux In Control	1 + 1 Monitor
7-Band Graphic Equalier	1 Left/Main, 1 Right/Monitor
AUX Send Master	Yes(1 Monitor)
Power AMP Assign	L+R(Bridge)/Stereo
Foot Pedal EFX Jack	Yes
Noise
Equivalent input noise	-110 dB
Residual output noise(SP OUT)	-70 dB
Residual output noise(MAIN OUT)	-97 dB
Crosstalk
Adjacent inputs or input to output	60 dB
Frequency Response
20Hz to 40kHz(Mic Pre Section)	+0, -1.5dB
20Hz to 30kHz(Power Amp Section)	+0, -1dB
Maximum Levels
Mic Preamp Input	+10 dBu
All Other Inputs	+18 dBu
All Mixer Outputs	+18 dBu
Impedances
Mic Preamp Input	4k Bal.
All Other input	＞10k
Line Input	4k
CH Equalization	3 Band
Low EQ	100 Hz +/-15dB
Mid EQ	2.5 kHz +/-12dB
Hi EQ	10 kHz +/-15dB
Power Requirements	900Watts
Dimension(WxHxD)	440 x 200 x 250
Shipping/CBM	0.0676
Net Weight	16.04kg
Shipping Weight	17.78g