Loa Array LMS-62P KOREA

 

THÔNG SỐ KỸ THUẬT SẢN PHẨM

Model LMS-62P Configuration 2-way Full-Range, Bi-amp High-frequency Transducer SK-70D HF Driver on SFG 10(Converging Lens) Low-frequency Transducer SK65200FP, 6.5"(162mm) woofer x 4. Frequency Response (± 3dB)¹ 80 Hz - 20kHz Frequency Range (-10dB)¹ 65Hz - 23kHz Nominal Impedance LF : 16Ω/4Ω Selectable / HF : 16Ω Fixed Continuous Power Capacity HF : 70W/280W PEAK LF : 360W/1440WPEAK Sensitivity (㏈ SPL, 1 W at 1 m) HF : 105dB LF : 100dB Recommended Power HF : 140W LF : 720W Maximum Output,Continuous/Peak (dB SPL at 1 m) HF: 123.47dB /129.47dB LF: 125.58dB /131.58dB Nominal Coverage H : 110º V: Dependent on number of elements used Enclosure Type Ported, trapezoidal Enclosure Material 2 x 12 mm birch plywood Finish Available in black or White(Option), paintable Grille Perforated, powder coated 16AWG steel, Connectors For Amplifiers 2× Neutrik Speakon in parallel Pins : 1+/1- LF Pins : 2+/2- HF Controls for Select LF Impedance 4 ohm/off/16 ohm by up down switch Controls for Select HF Sound Level Normal/off/-3dB by up down switch Attachment Points Integral, "I" plate adjustable rigging system, vertical splay adjustable in 1º incremments from 0º - 10º Dimensions   Weight (Net/Shipping) & Volume   Available Accessories B6015LMH: Array Frame/P62SB : Safety bar(full-back bar)/ P62LMIFF, P62LMIRR : Fly Grid plate/L09LM: Locking Pin B62LMU: ground-stacked "U" frame/ SPM-35130 speaker pole